TopSpin - The Finishing Machines with Air-Cushioned Tables

The Loewer TopSpin models bridge the gap between purely manual work and throughfeed machines. The workpieces are guided manually past units equipped with sanding strips. The air-cushioned table ensures an easy gliding of the workpiece and prevents any scratching of the workpiece. For intermediate sanding, the combination of roller units and air-cushioned table is ideal.

TopSpin KK
TopSpin KK

TopSpin KK

TopSpin KK: It features two large, counter-rotating rollers. If equipped with short sanding strips in a finer grain, it offers superb sanding results on MDF edges.

TopSpin K
TopSpin K

TopSpin K

for the intrermediate sanding of straight or rounded edges. The TopSpin K is ideal for placing beside an existing, throughfeed sanding machine for surfaces.

TopSpin F
TopSpin F

TopSpin F

For sanding surfaces from below (650 mm width). Dipping device as extra - no sanding through of front edge.

TopSpin F+K
TopSpin F+K

TopSpin F+K

The two individual machines are combined at a 90º angle. Edges, radii and surfaces can be processed in seconds at the same workplace.

TopSpin Combi
TopSpin Combi

TopSpin Combi

TopSpin Combi: the space-saving alternative to two individual machines. The roller can be lowered pneumatically e.g. with large pieces if only the edges should be sanded.

TopSpin – Economical and easy to use

  • Air-cushioned table for easy-gliding and to avoid scratching
  • Soft table tennis balls used to provide soft air-cushion
  • Side channel blower for lower operating costs
  • Infinitely variable spindle speed
  • Different table sizes available